AgentMarketMCP / SKILL 资产档案馆

目录 / HyperGrok Desk Incident Response

SKILL 未评级 已上架

HyperGrok Desk Incident Response

--- name: desk-incident-response description: What the desk does when something goes wrong on Hyperliquid - unknown send results, unexpected fills or positions, unprotected positions, stuck or orphaned orders, API outages, rate limiting, and suspected API wallet compromise. Contain first, reconcile from the exchange record, act only through approved tickets, then review. Use the moment anything does not match the ticket. license: MIT metadata: version: "1.2.1" author: Galleon Labs category: desk --- # Incident response An incident is any moment when the exchange record and the desk's expectation disagree, or when the desk cannot see the exchange at all. The reflex is: stop adding, look, contain with approval, then review. Never widen the harm by improvising. ## Declare Any Bot can declare an incident. Post on the floor: ``` INCIDENT INC-20260817-01 | 11:40 UTC | HG-20260817-02 | send timeout, result unknown | owner: Execution Trader ``` The Desk Lead confirms an owner (usually the Execution Trader for order/position incidents, the Risk Manager for exposure incidents, the Desk Lead for access incidents). New proposals pause until the incident is contained. ## Playbooks ### A. Unknown send result (timeout, 5xx, exception after send) 1. Do not resend. 2. `orderStatus` by cloid; `openOrders`; `userFills` since the send; `clearinghouseState`. 3. Found: continue reconciliation as normal; journal that the response was lost. 4. Not found: that is not proof. Wait until the signed `expiresAfter` deadline has passed, then reconcile again. Expiry prevents later acceptance; it does not cancel an order accepted before the deadline or remove its fills. 5. Without expiry, follow `desk-execution-protocol`: a `noop` needs an exact recovery ticket, Risk PASS, approval by id and native-gate coverage, and must use the original exact signed nonce, the same API wallet signer and network. Only the Execution Trader sends it, once. Confirm noop acceptance and reconcile the original; a newer nonce cannot invalidate it, and a nonce-reuse rejection does not prove what happened. Missing original nonce or an unconfirmed noop leaves the send reserved and new risk paused; escalate to the Desk Lead and user. 6. A replacement waits until later acceptance is impossible and existing exposure is reconciled, then needs a fresh ticket, Risk PASS and approval by id. If the exchange later shows the original order after a second one was sent: the desk has double exposure. Go to playbook C. ### B. Rejected order or partial fill - Rejection string in the response (`error`): quote it, map it via `hyperliquid-api-reference` (price precision, minimum notional, insufficient margin, reduce-only would increase position, invalid tif...). Fix is a new ticket, not a tweak-and-resend. - Partial fill on an IOC: the unfilled remainder is gone and the position is smaller than the ticket. Any `normalTpsl` children were **never placed** (children appear only when the parent fills fully, or is partially filled and then margin-cancelled), so the filled part is unprotected: report the actual size and get a stop for that size placed at priority (playbook D). - Partial fill on a resting order: normal; reconciliation continues. ### C. Position does not match expectation (too big, wrong side, unexpected market) 1. Read `clearinghouseState` and `userFills` for the last hour; establish the exact state. 2. Risk Manager computes exposure and liquidation distance now. 3. If exposure breaches limits: an **emergency reduce ticket** (reduce-only IOC at a slippage bound for the excess size) is written by the Risk Manager, approved by the user by id, sent by the Execution Trader. Priority handling, same protocol. 4. Journal what happened and why the mismatch occurred once known. ### D. Unprotected position (no resting stop) 1. Risk Manager flags it; the Desk Lead treats it as priority. 2. Protective stop ticket (trigger, reduce-only, correct side, sized to the position read live) through Risk PASS and user approval. This is also the path after any partial fill of an entry that carried `normalTpsl` children. 3. If the user has pre-authorised protective stops in `desk.md`, or a valid standing mandate covers this account and network, the Execution Trader places it under that authority and journals it. Under a mandate this is an alert to the user, not a suspension of the mandate. This is the one standing approval the desk actively recommends the user grant at setup, on every network, because it can only ever reduce risk. 4. Without that pre-authorisation the desk cannot act, and an unprotected position does not become safe while it waits. State the exposure and the distance to liquidation in the first alert, escalate on the deadline the user set in `desk.md` (15 minutes by default), and when it passes tell the user plainly that the fastest fix is theirs: close or protect the position in the Hyperliquid app. Do not keep pinging a channel nobody is reading. ### E. Orphaned or stuck orders - Orphaned (position flat, stop still resting): cancel ticket, or the standing approval for orphan clean-up if written in `desk.md`. Confirm from `openOrders`. - Stuck (order the exchange shows that the desk cannot cancel): read `orderStatus`; check whether it is a trigger child of a grouped order; try `cancelByCloid` if `cancel` by oid fails; if still stuck, report with the exact response and stop. ### F. Exchange unreachable, rate limited, or degraded - `/info` failing or slow: mark the desk **blind**; no new tickets; watches log the outage; check `https://api.hyperliquid.xyz/info` with a tiny `allMids` call every minute; report when back. - HTTP 429: back off (respect the response), reduce polling, prefer WebSocket for continuous data. Read `userRateLimit` for the account's remaining budget. - Blind with open positions: the user is told plainly that stops resting **on the exchange** still work while the desk cannot see; that is why stops are mandatory. - Connectivity returning is only the start of recovery. Follow `hyperliquid-websocket`'s gap/restart procedure: restore account and detailed order snapshots, recover overlapping fills, reconcile reservations and protection, then let Risk recheck capacity before new risk resumes. A successful public price read or a restarted process cannot lift the account pause. Protection and exits still use verified live state and the normal approval gates. ### G. Suspected API wallet compromise or misuse Signs: orders or fills the desk did not send, leverage changes nobody approved, unfamiliar `cloid`s. 1. The user revokes the API wallet immediately in the Hyperliquid app (the API page, `/API`) - the desk cannot do this for them and must not delay them. 2. Once revoked, the desk's key is dead; the Execution Trader confirms sends fail. 3. Read the full `historicalOrders` and `userFills` since the last known-good time; Risk Manager assesses exposure; emergency reduce or protection tickets as needed after the user creates a fresh API wallet and re-provisions it through the secure secret store. 4. Rotate: new key through the secure secret card only; nothing pasted in chat; journal the rotation time. 5. Incident review with a timeline. Remember the shared computer: every Bot could read the key's environment; that is why only an API wallet key (trade-only, cannot withdraw) is ever provisioned, and why testnet comes first. ### H. Daily loss stop hit Not an incident, but handled like one: Risk Manager posts it, `desk.md` gets `status: no-new-risk`, protective and exit tickets continue, new risk waits for the user's written reset. A standing mandate's own daily loss stop suspends the mandate for the rest of the UTC day instead: the Trade Reviewer journals `mandate suspended mandate <written> reason daily-loss-stop`, the user is alerted, and new sends need approval by id until 00:00 UTC. ### I. Under a standing mandate A rejected order, stale or unreadable data, or a position without a resting stop does not suspend a [standing mandate](../../docs/STANDING_MANDATE.md). Alert the user and handle the affected ticket with the playbooks above: a rejection voids its ticket, stale data REJECTs it for `missing input`, and a missing stop gets protection at priority. An unknown send result is never resent, whatever the mandate allows. Only the mandate's daily loss stop, its expiry, deleting the block or `standing mandate: revoked` end or suspend it. ## Containment rules - Contain with the smallest reversible action. Reduce, don't flip. Cancel one, not all, unless the user has asked for a dead-man's switch and its condition has occurred. - Every containment action is still a ticket with approval by id (or a pre-written standing approval in `desk.md`, or a valid standing mandate when the action is inside it). - Never withdraw, transfer or bridge as an incident response. - Never resend to "make sure". ## Close the incident The Trade Reviewer writes the incident review (`desk-post-trade-review`), the Desk Lead lifts the proposal pause and records the corrective action and its owner in `desk.md`.

模型生成摘要(rules/v1 · 2026-11-17 23:23):---
这是模型对公开材料的总结,不是官方声明,请以原链内容为准。

存档时间线

版本存档时间内容哈希内容
v12026-11-17 22:52240c97d7 可取

版本索引永久保留;内容副本只保留最新 1 份,更早版本仅留索引与哈希(存档时间线的证据链不会因此断裂)。

下载存档内容副本

纠错与举报(发现条目失效、署名有误或涉及侵权?)
提交举报 / 纠错

侵权举报经核验成立后,我们会即时下线该条目并删除已存的内容副本。